Show simple item record

dc.contributor.authorPizzani, María Cora
dc.contributor.otherSchpetter, Nicolás Ariel (tutor)
dc.date.accessioned2024-09-10T14:07:04Z
dc.date.available2024-09-10T14:07:04Z
dc.date.issued2024
dc.identifier.urihttps://repo.unlpam.edu.ar/handle/unlpam/9237
dc.description.abstractEn el proyecto presentado se diseñará y calculará el tendido eléctrico en media (MT) y baja tensión (BT) para un nuevo barrio en la localidad de Parera, La Pampa. El mismo, cuenta con 22 terrenos de 200 [m2] en los cuales se construirán viviendas del tipo social, contemplado en un plan provincial denominado “Mi Casa III”, perteneciente al IPAV (Instituto Provincial Autárquico de Vivienda). En relación al consumo de cada vivienda, se analizará la necesidad de una nueva subestación transformadora de manera tal que permita el suministro eléctrico de dichos terrenos. Se procede a la realización del tendido eléctrico aéreo de media tensión desde el punto más cercano de la línea existente hacia la nueva subestación transformadora, encargada de alimentar los puntos de consumo. Dicha línea, se diseñará de manera aérea coplanar horizontal y de aislación rígida, con conductores desnudos de aleación de aluminio. La misma partirá desde una estructura terminal existente y llegará a la subestación transformadora que alimentará al barrio, contando con una longitud aproximada de 140 [m]. Las estructuras utilizadas para el tendido eléctrico aéreo serán de hormigón armado. Esta línea contará con postes empotrados en el terreno mediante fundación de hormigón simple con forma de prisma. Junto con lo anterior, se realizará el tendido eléctrico de la línea de baja tensión que abastecerá a cada futuro terreno como así también a la línea de alumbrado público. Esta línea será tipo aérea y con cables preensamblados; el recorrido de las mismas será de forma radial abierta. El alumbrado público estará distribuido en el mismo cable que se utilizará para la distribución de las viviendas. Las luminarias elegidas estarán situadas sobre las estructuras de hormigón armado mediante un caño de brazo curvo. Las estructuras a utilizar serán de hormigón armado. Los terminales contarán con fundación de hormigón simple con forma de prisma mientras que los sostenes estarán directamente empotrados en el terreno. Se exceptúa el caso de las estructuras que llevarán los dos alimentadores y el alumbrado público, las cuales contarán con suelo cemento.
dc.description.abstractIn the project presented, the medium and low voltage power lines will be designed and calculated for a new neighborhood in the town of Parera, La Pampa. It has 22 plots of 200 [m2] on which social housing will be built, contemplated in a rovincial plan called “My House III”, belonging to the Provincial Autárquico Housing Institute. In relation to the consumption of each home, the need for a new transformer substation will be analyzed in such a way as to allow the electrical supply of said lands. The medium voltage overhead electrical wiring is carried out from the closest point of the existing line to the new transformer substation, in charge of feeding the consumption points. Said line will be designed in a horizontal coplanar aerial manner and with rigid insulation, with bare aluminum alloy conductors. It will start from an existing terminal structure and reach the transformer substation that will feed the neighborhood, with an approximate length of 140 [m]. The structures used for overhead power lines will be made of reinforced concrete. This line will have posts embedded in the ground using a simple prism-shaped concrete foundation. Along with the above, the electrical wiring of the low voltage line will be carried out that will supply each future plot of land as well as the public lighting line. This line will be aerial type and with pre-assembled cables; Their route will be open radial. Public lighting will be distributed on the same cable that will be used for the distribution of homes. The chosen luminaires will be located on the reinforced concrete structures using a curved arm pipe. The structures to be used will be made of reinforced concrete. The terminals will have a simple concrete foundation in the shape of a prism while the supports will be directly embedded in the ground. An exception is the case of the structures that will carry the two feeders and public lighting, which will have cement floors.
dc.format.extent1 recurso en línea (139 páginas) : Ilustraciones, gráficas, fotografías, planos;
dc.format.mediumapplication/pdf
dc.language.isospa
dc.rightsAtribución-NoComercial-CompartirIgual 2.5 Argentina (CC BY-NC-SA 2.5 AR)
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/2.5/ar/
dc.subject.otherIngeniería eléctrica : : Distribución de energía eléctrica
dc.titleCálculo y diseño de red eléctrica (Plan Mi Casa III- Parera, La Pampa)
dc.typetesis
dc.unlpam.subtypeproyecto final
dc.unlpam.carreraIngeniería Electromecánica
dc.unlpam.instituciondeorigenFacultad de Ingeniería
dc.unlpam.accessopenAccess
dc.unlpam.versionpublisherVersion
dc.unlpam.filiacionPizzani, María Cora. Universidad Nacional de La Pampa. Facultad de Ingeniería, Argentina.
dc.unlpam.sigtop621.31
dc.subject.palabraclaveDistribución eléctrica
dc.subject.palabraclaveRed de baja tensión
dc.subject.palabraclaveLínea de media tensión
dc.subject.palabraclaveBarrio
dc.unlpam.institucionotorganteUniversidad Nacional de La Pampa. Facultad de Ingeniería


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Atribución-NoComercial-CompartirIgual 2.5 Argentina (CC BY-NC-SA 2.5 AR)
Except where otherwise noted, this item's license is described as Creative Commons Atribución-NoComercial-CompartirIgual 2.5 Argentina (CC BY-NC-SA 2.5 AR)

Universidad Nacional de La Pampa
Biblioteca Central | Cnel.Gil 353 1er Sub | Tel.(02954) 451645 | repositorio@unlpam.edu.ar
Santa Rosa | La Pampa | Argentina | ©2020
DSpace soft copyright © 2002-2016  DuraSpaceTheme by 
Atmire NV